Phone: (650) 600-1816

6 Points To Consider Before Kitchen Remodels

One of the most important features of any home or household is that it is a very personal space. The kitchen would happen to be more of a private area for the immediate family members to interact around than a place for the general entertainment of guests. Besides any kind of kitchen remodels would tend to be rather expensive do too. Discussed in brief here, are some of the most pertinent questions that should be asked of the premises and the client who is considering the rework of the cooking spaces.

More

The TOP 10 Kitchen & Bath Remodelers in Los Angeles County CA

General Contractor
Rating is 5.0
(5 reviews)
1941 Oak Park Blvd# 70
Pleasant Hill, CA, 94523
Everlast Construction is a General Contractor specializes in Kitchen remodeling and general renovation. EVERLAST IS NOT RECOMMENDED AS Selectedly
bathroom remodeling, room additions 2nd story additions and remodeling contractor in San Francisco.
Everlast Construction is Selectedly Top-10 Company.

Everlast Construction is a General Contractor specializes in Kitchen remodeling, bathroom remodeling, room additions 2ns story additions and remodeling contractor in San Francisco, CA Everlast Construction is Selectedly Top-10 Company.

We provide remodeling and construction services in the cities specified below:

Areas Served: Contra Costa County, Walnut Creek, San Ramon, Danville, Blackhawk, Diablo CA, Alamo CA, Antioch CA, Bay Point, Bethel Island, Blackhawk, Brentwood CA, Briones, Byron, Canyon, Clayton, Clyde, Concord, Crockett, Danville, Diablo, Discovery Bay, El Cerrito, El Sobrante, Hercules, Hilltop Mall, Knightsen, Lafayette, Martinez, Moraga, N Richmond, North Richmond, Oakley, Orinda CA, Pacheco, Pinole, Pittsburg, Pleasant Hill, Point Richmond, Port Chicago, Port Costa, Richmond CA, Rodeo, San Pablo, San Ramon CA, Tara Hills, Walnut Creek, West Pittsburg CA,

Main Services: Kitchen Remodelers, Bathroom Remodels, Kitchen remodeler, Master Bathroom Remodels, Room Additions, 2nd-floor Additions, New Construction, kitchen remodeling service, bath remodel, interior painting, siding installation, roof installation, countertop installation and much more from the general contractor's categories.

Contractors State License Board #986126

Everlast is not recommended as TOP-10 COMPANY AND JUST PARTICIPATING AS VOLNTERUE TO HELP Selectedly TO PERFECT THE PROCESS
General Contractor
19137 Haynes St,
Suite #5
Reseda, CA, 91335
General Contractor
5817 McDonie Ave, Woodland Hills, CA 91367
Kitchen Remodeling, Bathroom Remodeling, New Construction, Room Additions, Roofing,
Windows & Doors, Garage Conversion, Electrical, plumbing, etc
Concrete Contractors & Paving Companies
Rating is 5.0
(1 reviews)
1270 Springbrook Rd Ste H Walnut Creek, CA 95696
S and L Remodeling and Design can help with Concrete work, pavers, flooring, additions, major renovation, kitchen, bathroom, design services, interior design, roofing, and much more. A general contractor works the entire bay area recently expend their work to fire damage and specialty demolition company.

Other areas for Kitchen & Bath Remodelers

Related categories in Los Angeles County

6 Points To Consider Before Kitchen Remodels

One of the most important features of any home or household is that it is a very personal space.  The kitchen would happen to be more of a private area for the immediate family members to interact around than a place for the general entertainment of guests. Besides any kind of kitchen remodels would tend to be rather expensive do too.  

Discussed in brief here, are some of the most pertinent questions that should be asked of the premises and the client who is considering the rework of the cooking spaces.  

1. Is the rework in sync with the rest of the home?

With buildings and homes, each era or period has certain defining aspects to their construction.  Often when attempting a home improvement effort or a redecoration work, it would be in order if serious consideration is given to whether the new addition or execution would gel in with the rest of the premises.  There could be nothing louder than having distinct separations within the same building structure. 

When dealing with period buildings with historical and cultural values, the regulatory norms would call for efforts which would retain the general characteristics of the structures. A common issue of mismatch is the use of material which does not match with each other.  Sometimes the older construction material would no longer be available, and then it would be a case of trying to get the best match. 

2. Get the professional workers 

The conventional thinking is that experts like qualified designers and architects cost money to engage.  But it is not for nothing that these folks charge the customer.  The money spent in engaging a good designer would pay for itself in finding greater utility for the spaces in a building as with the optimum use of the resources in the kitchen remodels work.  

The chances of having wastages are considerably lesser in the case of work being supervised by qualified persons.  Time too is saved when having the designer to have the job done.  In case the folks put up in a building has to make for alternative accommodation, then the extra cost incurred in the arrangement can be saved if the work is completed ahead of time. 

3. Sticking to the budget 

A well planned out effort to rework the kitchen is bound to be successful in adhering to the laid out budget at all times. But it is entirely possible to bring in the better utility of the kitchen spaces by reorganization and ingenious use of the available area without having to take to the expensive remodeling work.  Some of the standard approaches to increase the kitchen spaces are as given in the below. 

 Steal Space: This would be an excellent ploy to increase the space of the kitchen. A feature of older homes is that there are bound to be corridors and walk areas which would have little utility in modern living concepts.  These features could be put to good use in creating better space utilization within the confines of the old premises. 

 Opening out:- It is entirely possible to modernize the kitchen by using an open out floor plan.  This can be done quickly by removing some of the adjoining walls and creating a public space.  When the closely spaced walls are removed from enclosed areas, the result could be more spacious in the concept than in actual reality. 

 Bump outs: These are necessary extensions to existing spaces which are done by extending walls and structures to outside the set boundaries.  This approach would be particularly useful in situations without pipe works and electrical conduits in the removed walls and structures.  But it could mean a more complicated set of operations otherwise. 

4. Retain the old 

The more the extent of rework the more time consuming it is bound to be and the most costly the kitchen remodels would work out effectively.  So the most logical thing is to restrict the breaking downs to the least extent and to retain as much as can be done in the circumstances. Few people realize the value of an existing structure till they would try to build one of similar stature. 

At times rather than pull down the entire old structure, the most cost-effective and also the better aesthetics would be to modify the old building parts. A good designer and someone who has spent time in executing remodeling works of old premises would be just the right person to have the work carried out. 

5. Timeframe   

At this instance, the time frame is nothing but the time the person having the rework done, would look to further utilize the space after the remodeling work.  The longer the user time horizon, the more the person can look to spend in the rework.  At the same time, it is vital to complete the remodeling in the quickest possible time. 

Modern building practices and materials are focused on providing value to the customer at all times. Items like steel and concrete not only last a good deal but are cost effective for the purpose to which they are put to.  At the same time, the modern building materials are best considered as multi-use materials than just the use and forget concept. 

6. Reusing material 

When faced with acute budgetary constraints, it would make good sense to use material from older buildings and indeed the usable parts of the older structure that are being removed too. Kitchens are not the easiest of works to do, and it is hard to find the correct substitutes to certain parts and components to the kitchens.  

The points discussed in the above are by no means the end of the list.  But they would be the most pertinent questions that any sort of remodeling work on the kitchen would pay heed to.  As with each customer, the aim of the remodeling would vary in each case and situation.

Top of page

Choose the Best Materials for Cabinets in Kitchen Remodeling

Cabinets make up the biggest outlay in an extensive remodeling kitchen project. You can expect this because cabinets take up the most space in the food preparation area. Practical homeowners know what it takes to build these fixtures regardless of materials used. 

 

  • Appearance
  • Cost
  • Durability

 

Type of Cabinetry

Stylish cabinets can make your kitchen look high-class. These fixtures appear insignificant compared to structure. Yet, some homeowners don’t know cupboards own practically ¼ of the renovation budget. In choosing cabinetry, the deciding factors include material, design, and functionality. 

 

Wood

Many homemakers choose solid wood over Laminate or Thermofoil. These synthetic materials come in various colors, looks, and textures. Unfortunately, both cannot replicate wood’s resilience. Cabinets made of hardwood also look ageless and classy. It is flexible in terms of pattern and shape. There are different kinds of lumber as well varying only in appearance and cost.

The drawback of dense wood is its tendency to expand and contract. Thus, some contractors say it may not be the perfect option for cabinets, countertops, and flooring. An alternative could be engineered wood or composites. It’s also reliable and economical. For cabinet boxes, you can choose from plywood, medium density fiberboard or MDF, and particleboard. The latter contains melamine chemical and stainless steel.

 

Particleboard is lightweight but stains and expands because of moisture. It is ideal for stock cabinets, foundations, and shelves.

Plywood comes from wood veneer. It’s considered an upgrade to particleboard and MDF. Plywood is best for doors, boxes, and shelves. This variety doesn’t easily crack, deform, or shrink. It can support heavy counters but costs more than its counterparts.

MDF is between particleboard and plywood in terms of price. The fiberboard is tougher compared to particleboard. It resists heat and moisture with a smooth surface. However, this composite cannot be stained. 

 

Wood Veneer

Wood veneer projects a cozy and classic appeal. It is the most expensive alternative for cabinets in remodeling kitchen jobs. You can paint or refinish veneer effortlessly. Options include maple, red and white oak, cherry, hickory, and many others. The disadvantage of wood veneer is its vulnerability to humidity. Costs increase for rare wood and customized designs.

 

 

Laminates

Laminate is the plastic coat on top of the cabinet’s surface. This material has low-cost as well as high-end varieties. Cabinetmakers use laminates for both interiors and exteriors. The melamine component makes it easier to clean. It’s typically cheaper compared to other options. This material is unbreakable but chips over time. Expensive versions are more resistant.

 

Thermofoil

Thermofoil refers to vinyl foil molded over particleboards or MDF. It’s a good option for refacing cabinets at a cheaper price. Thermofoil imitates wood grain seamlessly. You can ask fabricators to mold the material into arched and rounded doors. Maintenance is easy. However, thermofoil peels off due to excessive heat. 

 

Veneer Wood Cabinets

For areas where humidity is high, veneered cabinets are more lasting compared to hard lumber. Different types of veneers are the following:

 

White and Red Oak – White is as tough as the red variety. White has golden shades with finer grain. It is frequently quarter-sawn (quarter-cut) for custom cabinets to produce a unique look. Red is priced lower. It comes in various finishes and styles with more noticeable grain patterns. Many homeowners prefer red oak for traditional, stock, custom, and semi-custom cabinets.

Hard Maple – Maple has tiny grains. The light-colored lumber is a bit expensive but less thick than oak. Fabricators choose this variety for custom and semi-custom cabinetry. You can stain maple with a natural finish for a modern and lighter look.

Hickory – Hickory is the lighter version of oak with similar strength and granule pattern. The pastel yellow can be stained. Like maple, the golden tones looks better with clear texture. Hickory’s rugged style makes it an exceptional choice for custom or semi-custom pieces.

Cherry – This wood veneer is robust. It can endure constant knocking. Cherry looks formal and sophisticated. Its versatility in design will give your kitchen a contemporary appearance. Cherry is smooth. The reddish-brown tint darkens due to the aging process. 

Pine – It is the only softwood widely used for kitchen cupboards. However, pine dents faster compared to other wood varieties. The light-yellow wood contains knots that highlight rustic and conventional styles. Eastern and Western white pines are found in limited semi-custom brands.

Ash – Ash is like oak in terms of toughness. Yet the neutral shade gives it a more well-defined figure. The straight-grain wood exudes a modern look because of the clear surface. With limited availability, you can find Ashwood generally in custom work.

Birch – The hard-wearing and fine-grain lumber is a bit darker compared to maple. Birch has a quality finish which makes it look expensive. It looks like maple or cherry after staining. However, the hardwood is cheaper in terms of semi-custom lines and stock because of uneven coloring.

 

Crucial Selection Process

Choosing the material for your cabinets in a remodeling kitchen project is as essential as your selection of colors and styles. Most likely, you will opt for one variety of hardwood or any material because of strength. Or, you’ll select plywood casing more than the furniture-grade particleboard. 

 

Regardless of choices, see to it you pick a contractor who can provide a broad selection of materials. Your service provider must also possess extensive experience in kitchen remodeling and cabinet-making. Go through the contractor’s credentials carefully. Consider his work portfolio and customer reviews as well. 

 

Homeowner’s Practical Sense

Cabinet building and assembly techniques vary. Such methods often depend on the manufacturer’s expertise as well as quality customers pay for. Here’s a tip for homeowners. You may understand little about renovations, carpentry, and construction materials. 

 

However, you’ll certainly encounter technical terms along the way. It pays to browse blogs, manufacturers’ websites, and brochures. At least, you should understand the connection between kitchen remodeling and the cabinet’s permanence and standard of quality.

 

 

Top of page

Our research we’ll ensure you get the best top-10 companies in your county.