Phone: (650) 600-1816

Interior Stone & Brick Walls

Installing an interior brick or else stone wall costs $1,000 to $3,000. While decorative choices tend to be priced at less, load-bearing styles will certainly cost more. In many interior applications, landlords can actually use veneer products to obtain the desired look. Veneer is probably easier than natural stone or brick and is therefore easier to install. It much comes at a lower price point like nicely because it contains less natural rock or rather brick and carrying it is simpler. People frequently produce accent walls with veneer to fake a vintage brick wall. Installation is same to installing a backsplash in a kitchen.

More

The TOP 10 Concrete Contractors & Paving Companies in Contra Costa County CA

Kitchen & Bath Remodelers
General Contractor
Rating is 4.9
(341 reviews)
1270 Springbrook rd #C Walnut Creek, CA 94597
Everlast Construction is a General Contractor specializes in Kitchen remodeling and general renovation. Selectedly
bathroom remodeling, room additions 2nd story additions and remodeling contractor in San Francisco.
Everlast Construction is Selectedly Top-10 Company.

Everlast Construction is a General Contractor specializes in Kitchen remodeling, bathroom remodeling, room additions 2ns story additions and remodeling contractor in San Francisco, CA Everlast Construction is Selectedly Top-10 Company.

We provide remodeling and construction services in the cities specified below:

Areas Served: Contra Costa County, Walnut Creek, San Ramon, Danville, Blackhawk, Diablo CA, Alamo CA, Antioch CA, Bay Point, Bethel Island, Blackhawk, Brentwood CA, Briones, Byron, Canyon, Clayton, Clyde, Concord, Crockett, Danville, Diablo, Discovery Bay, El Cerrito, El Sobrante, Hercules, Hilltop Mall, Knightsen, Lafayette, Martinez, Moraga, N Richmond, North Richmond, Oakley, Orinda CA, Pacheco, Pinole, Pittsburg, Pleasant Hill, Point Richmond, Port Chicago, Port Costa, Richmond CA, Rodeo, San Pablo, San Ramon CA, Tara Hills, Walnut Creek, West Pittsburg CA,

Main Services: Kitchen Remodelers, Bathroom Remodels, Kitchen remodeler, Master Bathroom Remodels, Room Additions, 2nd-floor Additions, New Construction, kitchen remodeling service, bath remodel, interior painting, siding installation, roof installation, countertop installation and much more from the general contractor's categories.

Contractors State License Board #986126
General Contractor
950 Detroit Ave
Ste 2B
Concord, CA 94518
Concrete Contractors & Paving Companies
We specialize in building your dream outdoor living space, starting with the custom design phase which continues through the detailed installation process. Our designs consist of both drawings and 3D walk-throughs of the project. Our goal is to ensure that your space is both beautiful and functional so you can enjoy it for years to come. The outdoor living projects we design and build often include elements such as paver patios, fire pits, fireplaces, kitchens, retaining walls, seat walls, outdoor lighting, and many other custom built features. We proudly serve homeowners in the East Bay Area.

OUTDOOR LIVING SPECIALISTS
COMPLETE LANDSCAPE DESIGN & LANDSCAPE CONSTRUCTION COMPANY

Driveway pavers * Patio Pavers * Retaining Walls * Walkways * Pool deck Pavers * Artificial Turf * Fences * Concrete * Artificial Grass * Pools Renovation * New Construction Pools * Outdoors Kitchens

Other areas for Concrete Contractors & Paving Companies

Related categories in Contra Costa County

Interior Stone & Brick Walls

Installing an interior brick or else stone wall costs $1,000 to $3,000. While decorative choices tend to be priced at less, load-bearing styles will certainly cost more.

In many interior applications, landlords can actually use veneer products to obtain the desired look. Veneer is probably easier than natural stone or brick and is therefore easier to install. It much comes at a lower price point like nicely because it contains less natural rock or rather brick and carrying it is simpler. People frequently produce accent walls with veneer to fake a vintage brick wall. Installation is same to installing a backsplash in a kitchen.

Siding

Brick and stone siding costs between $6 and $30 per square foot on average, being determined by the quality as well as type of product. Some high-end rock siding choices are worth up to $50 per square foot. Siding repairs cost $300 to $1,000.

Veneer products are popular for siding. These are thin blocks of brick or rather rock (natural or made) by that the wished for look will possibly be given way to the façade. You all could likely spend $10,000 to $50,000 to veneer an entire home outside.

One of the first masonry projects (really, one of the earliest methods of home building), brick and rock siding is fundamentally the same thing used to make the pyramids. It's a natural insulator, fire-resistant and low-upkeep, among many other benefits of rock siding.

Fireplaces & Chimney Stonework

Installing a chimney costs $1,000 to $3,500.

Other than just a pit in the wall where wood can truly be burned by you all, fireplaces can perhaps serve as an authentic hearth for your house. A difference is going to be for real made by expert work – and a wonderful impression – when it gets to features like these. Arguably, no other spot in the house can probably demonstrate a greater distinction between actual masonry work and imitations.

Balconies & Footpaths

Installing a veranda or instead walkway is worth $1,800 up to $4,800. Brick pavers and balconies are worth $1,000 up to $2,000.

Your own backyard may be altered into a connected whole by a professional and give you more various living space with the addition of a brick or rock courtyard and sidewalk. More than simply these joint projects, many other such garden projects can definitely add value and curb appeal to your own estate.

Back Yard or otherwise Breast Walls

Garden and breast walls are worth $3,000 down to $8,000 to install. These walls are shorter and typically frame gardens or otherwise hold a sloping garden. Many materials hold a job for these installations. All of you could use natural or rather manufactured stone, brick or oppositely a veneer about a poured concrete or concrete block core.

Brick or oppositely Stone Steps

Stone step installation costs an average of $2,200 and can definitely be as slight as $1,000 and much $12,000. Brick steps should cost $150 to $300 per step.

Stonework Mend

The construction, material and extent will be varied being actually counted on of damage by repair expenditures.

  • Chimney mend expenditures: $150 up to $750
  • Brick mend costs: $700 to $2,000
  • Foundation repair expenditures: $2,000 to $6,000
  • Courtyard or walkway mend costs: $700 to $2,000

Employing an accredited Masonry Contractor

Finding a quality and experienced masonry contractor takes some time and work. A few details are going to be longed to be arranged out ahead of time by one and all of you, such as the materials you wish and ballpark project measurements. This road, your very own bids will certainly be more accurate, and time calling the wrong pros will actually not be wasted by every last one of you. Once you have that information, your own assignment will possibly be wanted to be done simply by you.

  • Speak to at fewest three pros and understand written estimates for each. You all will be let by this to know what's out of doors there at the time that far on the point of costing. Each one of you don't want to pay more again and again than all of you have to, but there might be a reason one contractor's estimate is lower than another.
  • Recognize that specialized areas could be had of know-how by another pros. While Contractor Y has the greatest retaining wall system in your field, contractor X may certainly be able to make a first-rate rock fireplace.
  • Demand for references not just from past clients but too from clients who finished job like your very own. And contact them all for feedback.
  • Go with thy gut when making the final hiring decision but defend your personal investment by signing an obviously written contract.

For more various information and tips, read our own guide to hiring a masonry contractor.

Top of page

How to decide on the best design for Concrete Contractors and Paving Companies

How to decide on the best design for Concrete Contractors and Paving Companies 

Concrete is a composite material with fluid cement that hardens over a period. It can be based from lime or hydraulic concretes. An aggregate is mixed together with cement and water that forms into a slurry which can be easily poured and shaped according to the preferred form.

What is the ingredient for making concretes that are available in the market

The types of concrete in the market depend on the ingredient and the structure being built. Below are the most common types of concretes used today.

Cement – the Portland cement is used and the most common type of cement being used today.it is a mixture of calcium silicate, ferrites, and aluminates. They are made by heating with clay.

  • Water – water is combined with cement to create fluid slurry to flow it freely and mold into shapes.
  • Aggregates – the fine and coarse aggregates added the bulkiness of the cement mixture like the sand or fine stones. 
  • Reinforcement – reinforcing steel bars, steel iron can prevent from cracking the concrete.
  • Chemical admixtures – it could be a powder or fluids that are added to create a character in the concrete itself.

Mixing concrete ingredients needs a lot of knowledge with the help of proper equipment and following methods to create and fix the stability of the concrete.

However, paving is the art of forming the hard surface of the road or driveways which is made by materials like stone, tar or the concrete itself. A paver is a paving stone, tile or bricks used for floorings. 

What are the types of paving?

The most common pavers used for paving are stated below:

Interlocking concrete pavers – is a particular type of paper, also known as a segmental paver, which is also available in water-permeable designs.

Stone pavers – this type of paving is widely used in buildings and landscaping because of its durability, strength and excellent attraction.

Above differs between concrete and paving. But how to decide on choosing the best design for concrete and paving companies?

How to decide on the best design for concrete contractors and paving companies?

The design of the concrete and paving can help attract clients and also stabilize it. Finding and hiring the right contractors for the project can help produce the successful concrete and paving.

Compare varieties of design from different contractors. Choosing the best plan for the project would be very useful. It should balance the client’s needs for the project selected.

  • Ask a construction inspector for the list of verified contractor and companies. They should have permit and licenses for doing the project.
  • Ask for referrals from different clients. Do some research for the project needed.
  • Have at least a certain period to discuss to companies about the project. 
  • Compare cost from a different side of contractors with the same project. This will eventually help in the decision-making for pursuing the project.
  • Installing these projects should have the proper precision from experts. It should always balance ideas between the client and the contractors. 

Top of page

Our research we’ll ensure you get the best top-10 companies in your county.